Mazdaspeed6 L4-2.3L Turbo (2006)
1. Assemble the evaporator temperature sensor as shown in the above figure.
Sensor Clamp Assembly Note
1. Attach the sensor (clamp as shown in the above figure.
Adhesive polyurethane (2) Assembly Note
1. Attach the adhesive polyurethane (2) as shown in the figure.
2. After assembling the outlet pipe as shown in the figure, attach the adhesive polyurethane (2) so that it adheres around the high-pressure side of the
outlet pipe.
Adhesive polyurethane (1) Assembly Note
1. Attach the adhesive polyurethane (2) as shown in the above figure.