Mazdaspeed6 L4-2.3L Turbo (2006)
Combination Switch: Service and Repair
Removal and Installation
COMBINATION SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the driver-side air bag module.
3. Remove the steering wheel.
4. Remove the column cover.
CAUTION: The clock spring is generally not to be removed from the combination switch as may result in a malfunction of the steering angle
sensor. However, remove it only when replacing the clock spring as a single unit by referring to CLOCK SPRING REMOVAL/INSTALLATION.
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
