Mazdaspeed6 L4-2.3L Turbo (2006)
Wheel Fastener: Service and Repair
Rear Axle
WHEEL HUB BOLT REPLACEMENT [AWD]
1. Remove the brake caliper component and the disc plate.
2. Remove the wheel hub bolt using the SST as shown in the figure.
Note:
^
If the dust cover interferes with the wheel hub bolt and the wheel hub bolt cannot be removed, tap the part shown in the figure with a chisel
lightly and bend the process back to the knuckle side.
3. Install a new wheel hub bolt into the wheel hub and install a washer and hub nut on the hub bolt.
4. Tighten the hub nut while holding the wheel hub using a brass bar.
