Mazdaspeed6 L4-2.3L Turbo (2006)
Transmission Position Switch/Sensor: Adjustments
TRANSAXLE RANGE (TR) SWITCH ADJUSTMENT [FS5A-EL]
1. Disconnect the negative battery cable.
2. Remove the air cleaner component.
Caution:
^
Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the
connector when disconnecting it.
3. Remove the clip and disconnect the selector cable.
4. Rotate the manual shaft to the converter housing side fully, then return 2 notches to set the N position.
5. Disconnect the TR switch connector.
6. Loosen the TR switch mounting bolts.