Mazdaspeed6 L4-2.3L Turbo (2006)
16. Set the adjustable wrench as shown to hold the manual shaft lever, and tighten the manual shaft nut.
Tightening torque 32 - 46 Nm (3.2 - 4.7 kgf-m, 24 - 33 ft. lbs.)
17. Install the clip to the selector cable as shown in the figure.
18. Shift the selector lever to P position.
19. Turn the manual shaft lever to P position.
20. Connect the selector cable.
21. Inspect for continuity at the TR switch.
^
If not as specified, readjust the TR switch.
22. Connect the TR switch connector,
23. Install the air cleaner component.
24. Connect the negative battery cable.
25. Inspect operation of the TR switch.
^
If not as specified, readjust the TR switch.
