Mazdaspeed6 L4-2.3L Turbo (2006)
Evaporative Emission Control Canister: Testing and Inspection
CHARCOAL CANISTER INSPECTION
1. Remove the charcoal canister.
2. Plug ports A and C, then blow air into port B.
CAUTION: Do not apply the pressure more than 20 kPa {0.2 kgf/sq.cm, 2.8 psi} to the charcoal canister. Doing so will damage the charcoal
canister.
3. Verify that there is no air leakage from the case.
-
If not as specified, replace the charcoal canister. (See Fuel Tank Side.)