Mazdaspeed6 L4-2.3L Turbo (2006)
3. Pull out the fuel hose straight from the fuel pipe and disconnect it.
4. Cover the disconnected quick release connector and fuel pipe with vinyl sheeting or a similar material to prevent it from scratches or dirt.
Type B Removal
CAUTION:
-
When releasing the retainer locks, take extreme care not to damage the charcoal canister and pipe.
-
Be careful not to damage the pipe when unlocking the retainer.
NOTE: If the quick release connector is removed, replace the retainer with a new one.
1. Follow "BEFORE SERVICE PRECAUTION" and remove dirt from the connecting surfaces before performing any work operations.
NOTE: The retainer is attached to the pipe even after the connector is disconnected.
2. Set the SST parallel to the quick release connector.
NOTE: The quick release connector can be removed by pushing the center of the retainer tabs.
3. Hold the center of the retainer tabs with the SST ends and press the retainer.
4. Pull the connector side and disconnect the quick release connector.
