Mazdaspeed6 L4-2.3L Turbo (2006)
Fuel Pump Ballast Resistor: Service and Repair
FUEL PUMP RESISTOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the air cleaner.
3. Disconnect the fuel pump resistor connector.
4. Remove in the fuel pump resistor.
5. Install in the order as shown in the figure.
Tightening torque: 4.2-6.2 N.m {43-63 kgf.cm, 38-54 in.lbf}
6. Connect the fuel pump resistor connector.
