Mazdaspeed6 L4-2.3L Turbo (2006)
-
If not within the specification, replace the CKP sensor.
-
If the monitor item condition/specification (reference) is without the specification, even though the voltage is within the specification, carry
out the ."Circuit Open/Short Inspection".
Circuit Open/Short Inspection
1.Inspect the following wiring harnesses for an open or short circuit. (Continuity check)
Open circuit
- If there is no continuity, the circuit is open. Repair or replace the wiring harness.
- CKP sensor terminal A and PCM terminal 2H
- CKP sensor terminal B and PCM terminal 2C
- CKP sensor terminal C and main relay terminal C