Mazdaspeed6 L4-2.3L Turbo (2006)
Transmission Temperature Sensor/Switch: Service and Repair
Transaxle Fluid Temperature (TFT) Sensor Removal/Installation [FS5A-EL]
TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR REMOVAL/INSTALLATION [FS5A-EL]
Warning:
^
When the transaxle and ATF are hot, they can badly burn. Turn off the engine and wait until they are cool before replacing the ATF.
1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Drain the ATF.
4. Remove the oil pan.
5. Remove the primary control valve body.
6. Remove the coupler component.
7. Install the coupler component.
8. Install the primary control valve body.
9. Install the oil pan.
10. Install the under cover.
11. Connect the negative battery cable.
12. Add ATF.
13. Perform the mechanical system test.
14. Perform the road test.
