Mazdaspeed6 L4-2.3L Turbo (2006)
16. Install a new O-ring to the coupler component.
Caution:
^
Do not apply too much force to the coupler component.
^
Do not damage the coupler component.
17. Install the coupler component to the transaxle case.
18. Install a new coupler component lock plate.
19. Install the control valve body.
20. Apply ATF to a new O-ring and install it on the oil pipe.
21. Install the oil pipe and oil hose.
22. Connect the lower radiator hose.
23. Add the engine coolant.
24. Add ATF to the specified level.
25. Install the front crossmember.
26. Install the under cover.
27. Install the TCM.
28. Install the air cleaner component and air cleaner bracket.
29. Connect the negative battery cable,
30. Perform the mechanical system test.
