Mazdaspeed6 L4-2.3L Turbo (2006)
1. Mark the brake pipe connecting positions before removal for reference during installation.
ABS/TCS HU/CM Removal/Installation Note
1. When removing/installing the ABS/TCS HU/CM from/to the vehicle, attach a strip of protective tape on the ABS/ TCS HU/CM connector to
prevent brake fluid from entering.
Brake Pipe Installation Note
1. When installing the brake pipe, align the marks made before removal with the ABS/TCS HU/CM as shown in the figure.
Connector Installation Note
1. Verify that the lock lever of the harness connector is securely locked.
