Mazdaspeed6 L4-2.3L Turbo (2006)
1. Mark the brake pipe connecting positions before removal for reference during installation.
DSC HU/CM Removal/Installation Note
1. When removing/installing the DSC HU/CM from/to the vehicle, attach a strip of protective tape on the DSC HU/CM connector to prevent brake
fluid from entering.
Brake Pipe Installation Note
1. When installing the brake pipe, align the marks made before removal with the DSC HU/CM as shown in the figure
Connector Installation Note
1. Verify that the lock lever of the harness connector is securely locked.
