Mazdaspeed6 L4-2.3L Turbo (2006)
3. Connect the SST (Deployment too) to the SST (Adapter harness).
4. Connect the red clip of the SST (Deployment tool) to the positive battery terminal and the black clip to the negative battery terminal.
5. Verify that the red light on the SST (Deployment tool) is illuminated.
6. Make sure all persons are standing at least 6 m(20 ft) from the vehicle.
7. Press the activation switch on the SST (Deployment tool) to deploy the side air bag module.
Curtain air bag module (sport sedan)
1. Remove the tire house trim.
2. Disconnect the curtain air bag module connector.
3. Connect the SST (Adapter harness) to the curtain air bag module.
4. Connect the SST (Deployment tool) to the SST (Adapter harness).
5. Connect the red clip of the SST (Deployment tool) to the positive battery terminal and the black clip to the negative battery terminal.
6. Verify that the red light on the SST (Deployment tool) is illuminated.
