mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Air Bag Module and Pre-Tensioner Seat Belt Deployment Procedures|Page 369 > < Air Bag Module and Pre-Tensioner Seat Belt Deployment Procedures|Page 367
Page 5
background image

7. Make sure all persons are standing at least 6 m (20 ft) from the vehicle.

8. Press the activation switch on the SST (Deployment tool) to deploy the curtain air bag module.

Curtain air bag module (5-Door, sport wagon)

1. Remove the trunk side trim. (5-Door)
2. Remove the headliner. (Sport Wagon)

3. Disconnect the curtain air bag module connector.

4. Connect the SST (Adapter harness) to the curtain air bag module.

5. Connect the SST (Deployment tool) to the SST (Adapter harness).
6. Connect the red clip of the SST (Deployment tool) to the positive battery terminal and the black clip to the negative battery terminal.
7. Verify that the red light on the SST (Deployment tool) is illuminated.
8. Make sure all persons are standing at least 6 m (20 ft) from the vehicle.

Air Bag Module and Pre-Tensioner Seat Belt Deployment Procedures|Page 369 > < Air Bag Module and Pre-Tensioner Seat Belt Deployment Procedures|Page 367