Mazdaspeed6 L4-2.3L Turbo (2006)
9. Press the activation switch on the SST (Deployment tool) to deploy the curtain air bag module.
Pre-tensioner seat belt
1. Remove the B-pillar lower trim.
2. Remove the pre-tensioner seat belt and connect the SST (Adapter harness) to it as shown in the above figure.
3. Install the pre-tensioner seat belt.
4. Connect the SST (Deployment tool) to the SST (Adapter harness).
5. Connect the red clip of the SST (Deployment tool) to the positive battery terminal and the black clip to the negative battery terminal.
6. Verify that the red light on the SST (Deployment tool) is illuminated.
7. Make sure all persons are standing at least 6 m (20 ft) from the vehicle.
8. Press the activation switch on the SST (Deployment tool) to deploy the pre-tensioner seat belt.
Deployment Procedure for Outside of Vehicle
