Mazdaspeed6 L4-2.3L Turbo (2006)
11. Press the activation switch on the SST (Deployment tool) to deploy the curtain air bag module.
Pre-tensioner seat belt
1. Remove the pre-tensioner seat belt.
WARNING: If the pre-tensioner seat belt is not properly installed to the tire, serious injury may occur when the pre-tensioner part is
deployed. When installing the pre-tensioner seat belt to the tire, make sure the pre-tensioner part is inside the tire.
2. Connect the SST (Adapter harness) to the pre-tensioner seat belt as shown in the figure.
3. With the pre-tensioner part inside the tire, tie the pre-tensioner seat belt to the tire. Wrap the wire through the tire and around the pre-tensioner seat
belt at least 4 times.
4. Stack the tire with the pre-tensioner seat belt on top of two tires. Stack a tire on top of the three tires. Stack another tire that has a wheel on top of
the four tires.
