Mazdaspeed6 L4-2.3L Turbo (2006)
5. Tie all tires together with wire.
6. Connect the SST (Deployment tool) to the SST (Adapter harness).
7. Connect the red clip of the SST (Deployment tool) to the positive battery terminal and the black clip to the negative battery terminal.
8. Verify that the red light on the SST (Deployment tool) is illuminated.
9. Make sure all persons are standing at least 6 m (20 ft) from the vehicle.
10. Press the activation switch on the SST (Deployment tool) to deploy the pre-tensioner seat belt.