Mazdaspeed6 L4-2.3L Turbo (2006)
6. Connect the SST (Deployment tool) to the SST (Adapter harness).
7. Connect the red clip of the SST (Deployment tool) to the positive battery terminal and the black clip to the negative battery terminal.
8. Verify that the red light on the SST (Deployment tool) is illuminated.
9. Make sure all persons are standing at least 6 m (20 ft) from the vehicle.
10. Press the activation switch on the SST (Deployment tool) to deploy the side air bag module.
Curtain air bag module (sport sedan)
1. Remove the curtain air bag module.
2. Secure the curtain air bag module in a vise, and cut off the deployment section, as shown in the figure.
WARNING: Be sure not to collapse the pipe on the side where it is cut. If it is collapsed, the interior pressure of the pipe will build up
and can cause it to explode during air bag modular deployment.
3. Tie the side air bag module to the tire with the module facing the center of the tire. Wrap the wire through the tire and around the bracket at least 4
