Mazdaspeed6 L4-2.3L Turbo (2006)
Neutral Safety Switch: Service and Repair
Vehicle Speedometer Sensor Removal & Installation (Without ABS) [A65M-R]
VEHICLE SPEEDOMETER SENSOR REMOVAL/INSTALLATION (WITHOUT ABS) [A65M-R]
1. Disconnect the negative battery cable.
2. Remove the battery and battery tray.
3. Remove the under cover.
4. Disconnect the vehicle speedometer sensor connector.
5. Remove the vehicle speedometer sensor.
6. Apply transmission oil to a new O-ring and install it on a vehicle speedometer sensor.
7. Install the vehicle speedometer sensor.
Tightening torque 7.8 - 11.0 Nm (80 - 112 kgf-cm, 57.6 - 81.1 inch lbs.)
8. Connect the vehicle speedometer sensor connector.
9. Install the under cover.
10. Install the battery and battery tray.
11. Connect the negative battery cable.
