Mazdaspeed6 L4-2.3L Turbo (2006)
Transmission Temperature Sensor/Switch: Testing and Inspection
Transaxle Fluid Temperature (TFT) Sensor Inspection [FS5A-EL]
TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR INSPECTION [FS5A-EL]
On-Vehicle Inspection
1. Disconnect the negative battery cable.
2. Remove the air cleaner component.
Caution:
^
Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the
connector when disconnecting it.
3. Disconnect the transaxle connector (primary).
4. Measure the resistance between the terminals E and H. If it is out of specification, perform the off-vehicle inspection of TFT sensor.
Transaxle fluid temperature (TFT) sensor
5. Install the air cleaner component.
6. Connect the negative battery cable.
Off-Vehicle Inspection
