Mazdaspeed6 L4-2.3L Turbo (2006)
5. Using the SST, place the oil seal and inner guide at the edge of the steering rack's pinion, and remove the SST.
6. After installing the steering rack to the gear housing, press the oil seal and inner guide using the SSTs until the force required suddenly increases.
Holder Assembly Note
1. Apply grease to the U-gasket and O-ring.
2. Assemble the U-gasket, backup ring and O-ring into the holder.
3. Assemble the SST to the steering rack.
4. Stake the holder to the cylinder using a punch.
Oil Seal Assembly Note
1. Apply grease to a new oil seal.
2. Press in the new oil seal using the SSTs.
Upper Bearing Assembly Note
