Mazdaspeed6 L4-2.3L Turbo (2006)
6. If not as specified, repeat steps 2 through 5.
7. Install the locknut using the SST (49 B032 320).
Tightening torque 40 - 49 Nm (4.1 - 4.9 kgf-m, 30 - 36 ft. lbs.)
Hermetic sealing inspection
1. Connect the SSTs to the power cylinder section of the gear housing.
2. Apply 53.3 kPa 1400 mmHg, 15.7 in-Hg) vacuum with a vacuum pump and verify that it is held for at least 30 s.
3. If the vacuum is not held, replace the oil seal.
POWER STEERING OIL PUMP REMOVAL/INSTALLATION [L3, L3 WITH TC]
