Mazdaspeed6 L4-2.3L Turbo (2006)
11.
Align marks and assemble tube and shaft.
12.
Wipe off any extra grease.
13.
Fit intermediate shaft to steering gear and tighten pinch bolt.
Tightening torque: 13.8 - 19.5 ft-lbf. (18.8 26.5 Nm, 1.9 - 2.7 kgfm)
14.
Fit joint cover and reinstall two (2) push-nuts.
15.
After reassembly, operate telescopic or tilt steering as follows:
-
For vehicles equipped with tilt and telescopic: Operate telescopic three (3) times from front to rear. Operate tilt three (3) times from top to
bottom, then return to original position.
-
For vehicles equipped with tilt only: Operate tilt three (3) times from top to bottom, then return to original position.
16.
Verify repair.
PART(S) INFORMATION
WARRANTY INFORMATION
Disclaimer