Mazdaspeed6 L4-2.3L Turbo (2006)
1. Remove the wheel bearing from the knuckle using the SSTs.
Dust Cover Removal Note
Note:
^
The dust cover does not need to be removed unless it is being replaced.
1. Mark the dust cover and knuckle for proper installation.
2. Remove the dust cover from the knuckle using a chisel.
Wheel Hub Bolt Removal Note
Note:
^
The wheel hub bolts do not need to be removed unless they are being replaced.
1. Remove the wheel hub bolts from the wheel hub using a press.
Wheel Hub Bolt Installation Note
1. Install the new wheel hub bolts to the wheel hub using a press.
Dust Cover Installation Note
