Mazdaspeed6 L4-2.3L Turbo (2006)
Warning:
^
Be sure that the trailing link and the knuckle component are supported securely with a jack. Otherwise, the trailing link and/or the
knuckle component may fall, causing death or injury, or vehicle damage.
1. Support the trailing link and the knuckle component with a jack.
2. Tighten the bolts at the trailing link (front).
Rear Coil Spring Installation Note
1. Install the coil spring so that its small diameter end points downward.
2. Set a jack to the bottom of the lower arm, and jack it up gradually
Warning:
^
Be careful when installing the coil spring, as it may fly out by spring force, causing death or injury, or vehicle damage.
3. Install the lower arm bolts (outer).
Locknut Installation Note
1. Install a new locknut and stake it as shown.