Mazdaspeed6 L4-2.3L Turbo (2006)
Power Window Motor: Testing and Inspection
POWER WINDOW MOTOR INSPECTION
Driver's Side and Passenger's Side
1. Disconnect the power window motor connector.
2. Apply battery positive voltage to the power window motor terminals E and F and inspect the operation the power window motor operation.
-
If there is any malfunction, replace the power window motor.
3. Apply battery positive voltage to the power window motor terminal D and connect terminal C to ground.
4. Measure the voltage at terminal B and A while performing Step 3.
-
If there is any malfunction, replace the power window motor.
Voltage Pulse wave: MAX.5 V, MIN.0 V
Rear Side
1. Apply battery positive voltage to the power window motor terminals and inspect the power window motor operation.
-
If there is any malfunction, replace the power window motor.