Millenia V6-2255cc 2.3L DOHC (1995)
Fig. 5 Lower Lateral Link Ball Joint Removal
Installation
1. Compress each coil spring using suitable spring compressor. Install each spring so lower coil is seated on step of lower seat.
2. Install mount so shock absorber flexible hose bracket faces front of vehicle, Fig. 6.
3. Temporarily tighten piston rod nut, then remove spring compressor, ensuring lower coil of spring is seated on step of lower seat.
4. Secure mount in vise, then tighten nut to specifications.
5. Install shock absorber and spring so ABS wheel speed sensor bracket faces rear of vehicle.
6. Install cap and nuts, then shock absorber and spring bolt and nut.
7. Install lower lateral link ball joint, then ABS wheel speed sensor harness.
8. Install rear package front trim and speaker cover, then first aid kit.
Fig. 6 Mount Installation
