Millenia L V6-2.5L DOHC (1997)
Antenna: Testing and Inspection
Front Antenna Feeder
Removal / Installation
1. Remove the dashboard.
2. Remove the clips.
3. Disconnect the front antenna feeder.
4. Install in the reverse order of removal.
Inspection
1. Disconnect the antenna jack.
NOTE: There is no continuity between antenna terminals A and E since the condenser is installed between these terminals.
2. Verify that there is no continuity between the front antenna feeder terminals A and B, C and D.
3. Check for continuity between the front antenna feeder terminals by using an ohmmeter.
4. If not specified, replace the front antenna feeder.
