Millenia L V6-2.5L DOHC (1997)
Drink Holders: All Technical Service Bulletins
Cup Holder - Will Not Stay In Locked Position
Bulletin No.: 052/96
Issued: 12/05/96
Revised:
Category
S
Applicable Model/s
1997 Millenia
Subject:
CUP HOLDER WILL NOT STAY IN LOCKED POSITION
DESCRIPTION
Temperature changes during shipping and storage may affect the cup holder's locking ability. Inspect the cup holder operation according to the
procedures below. If the operation is not correct, replace the cup holder.
INSPECTION PROCEDURE
1.
Open cup holder.
^
Allow cup holder to extend more than one (1) inch past console lid.
2.
Retract cup holder until locked by pressing on the center of the holder.
3.
Repeat steps 1 and 2 five (5) times.
^
If cup holder is difficult to lock, replace cup holder.
REPLACEMENT INSTRUCTIONS
