Millenia L V6-2.5L DOHC (1997)
ASSEMBLE
1. Before assembly, clean the cylinder body inner surface and a new piston assembly by using brake fluid.
2. Install the secondary spring assembly into the cylinder body with the retainer facing the cylinder body.
3. Apply the specified grease (supplied in the repair kit) to the cup of the secondary piston assembly.
4. Install the secondary piston assembly into the cylinder body with the hole in the piston assembly facing the cylinder body.
5. Using the old sleeve of the primary piston assembly, push the secondary piston assembly into the cylinder body.
CAUTION: Holding only the piston or the sleeve of the primary piston assembly could allow the components to fall out and become damaged.
When handling the primary piston assembly, hold the cap and keep the assembly level.
6. Apply the specified grease (supplied in the repair kit) to the cup of the primary piston assembly.
7. Install the primary piston assembly into the cylinder body while keeping the piston assembly and the cylinder body
