Millenia L V6-2.5L DOHC (1997)
Timing Belt: Service and Repair
Timing Components
1. Disconnect the negative battery cable.
2. Remove the right front wheel.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5. Start the engine and check the followings:
-
Runout or contact of pulley or drive belt.
-
Ignition timing.
6. Turn off the engine and check the drive belt deflection.
CRANKSHAFT PULLEY REMOVAL NOTE
1. Install the Special Service Tool (SST) to the crankshaft pulley.
CAUTION: The crankshaft position sensor rotor is on the rear of the crankshaft pulley, and can be damaged easily.
