mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Spark Plug Wire - Resistance Specifications|Page 1950 > < Number One Cylinder|Locations
Page 1
background image

Ignition Cable: Technical Service Bulletins
Spark Plug Wire - Resistance Specifications

Bulletin No.: 006/97
Issued: 10/31/97
Revised:

Category
G

Applicable Model/s
See Table Below

Subject:
SPARK PLUG WIRE RESISTANCE SPECIFICATIONS

DESCRIPTION

The OE (black colored) spark plug wires have been modified to improve durability. When diagnosing a concern and the spark plug wires are the
suspected cause, check each wire's resistance according to the table shown prior to replacement.

NOTE

The specifications listed DO NOT apply to replacement spark plug wires (NGK, blue colored). Service Managers should place a copy of this bulletin
in the appropriate workshop manual.

MODIFICATION I.D.
The modified spark plug wires have a modification mark or are made using a different material. Refer to the illustration to identify the modified plug
wires.

1.

A small 1 mm dimple on the plastic extender next to the numbers.

2.

The plug wire's extender has a glossy finish.

3.

The plug wire's extender is rubber material.

Disclaimer

Spark Plug Wire - Resistance Specifications|Page 1950 > < Number One Cylinder|Locations