Millenia L V6-2.5L DOHC (1997)
Steering Gear: All Technical Service Bulletins
Steering Gear - Fluid Loss
Bulletin No.: 004/97
Issued: 12/28/97
Revised
Category
N
Applicable Model/s
All Models
With Rack/Pinion
Subject:
CHECKING PROCEDURE FOR POWER STEERING BOOT LEAKAGE
DESCRIPTION
Customers complaining of problems associated with power steering fluid loss should have the vehicle inspected according to the instructions in section N
of the workshop manual. If the leak is determined to be coming from the power steering gear, follow the procedures listed below.
NOTE:
Service Managers should place a copy of this bulletin in section N of the workshop manual.
INSPECTION PROCEDURE
1.
Check the color of the fluid that is leaking.
^
If the fluid is red, proceed to step 3.
^
If the fluid is any color other than red, (i.e. yellow, colorless), this is grease and no problem exists with the power steering gear. Proceed to
step 2.
2.
Inspect the boot for damage (i.e. cracks or tears).
3.
Remove the boot wire and inspect the inside of the boot for contamination (dirt, water, etc.).
^
If there is a large quantity of red fluid inside the boot, this indicates insufficient sealing. Replace the side seal and the power steering gear
according to section N of the workshop manual.
^
If a minimal quantity of red fluid is present, proceed to step 4.
4.
Start the engine and turn the steering wheel right and left, lock to lock.
