mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Steering Wheel - Slightly Off Center.|Page 4089 > < Steering Wheel - Slightly Off Center.|Page 4087
Page 1
background image

Steering Wheel: Testing and Inspection

STEERING WHEEL PLAY 

With the wheels in the straight-ahead position, gently turn the steering wheel left and right and verify that the play is within 0 - 30 mm (0 - 1.18
inch)
.

NOTE:  If the play exceeds 0 - 30 mm (0 - 1.18 inch), either the steering joints are worn or the backlash of the steering gear is excessive.

LOOSENESS OR PLAY OF STEERING WHEEL 

Move the steering wheel in the directions shown to check for column bearing and bushing wear, steering shaft joint play, steering wheel looseness,
and column looseness.

STEERING WHEEL EFFORT 

1. Check the following points: 

a. Tire size and tire pressure 
b. Fluid level 
c. Drive belt deflection

2. With the vehicle on a hard, level surface, put the wheels in the straight-ahead position.
3. Start the engine and warm the power steering fluid to 50 - 60°C (122 - 140°F).
4. Remove the air bag module. Follow service precautions outlined in Air Bags and Seat Belts.

Steering Wheel - Slightly Off Center.|Page 4089 > < Steering Wheel - Slightly Off Center.|Page 4087