Millenia L V6-2.5L DOHC (1997)
Inspection Of Small Sun Gear, Sun Gear Drum
1. Measure the small sun gear and the sun gear drum inner diameters. Inner diameter of the small sun gear is 24.0 mm (0.945 inch) maximum
and for sun gear drum is 33.4 mm (1.31 inch) maximum.
2. If not within specification, replace the small sun gear or the sun gear drum.
Assembly Procedure
1. Install the small sun gear into the sun gear drum.
2. Install a new snap ring.
3. Apply petroleum jelly to the thrust bearing and secure it to the one-way clutch inner race. Thrust bearing outer diameter is 62.15 mm (2.45
inch).
4. Verify that the spring cage of the one-way clutch faces toward the outer race as shown.
5. Install the one-way clutch 1 into the one-way clutch outer race.
6. Apply petroleum jelly to the thrust bearing and secure it to the one-way clutch 1. Thrust bearing outer diameter is 62.15 mm (2.45 inch).
7. Align the splines of the one-way clutch inner race and small sun gear clutch hub.
8. Apply ATF to the one-way clutch 1 and one-way clutch outer race.
9. Install the one-way clutch inner race into the one-way clutch outer race by turning the inner race counterclockwise.
