Millenia L V6-2.5L DOHC (1997)
10. Install the one-way clutch inner race into the one-way clutch outer race by turning the inner race counterclockwise only. If the one-way clutch
inner race turns or locks in both directions, replace one-way clutch 1.
11. Hold the one-way clutch outer race. Verify that the inner race rotates smoothly in the counterclockwise direction only. If the one-way clutch
inner race turns only clockwise, the spring cage might have been installed backwards.
12. Align the splines of the one-way clutch inner race with the splines on the small sun gear hub as shown in the illustration.
13. Install a new snap ring.
14. Verify that when the small sun gear is held, the one-way clutch outer race turns smoothly and only clockwise.
15. Apply petroleum jelly to the thrust bearing and secure it to the sun gear drum. Thrust bearing outer diameter is 72.0 mm (2.83 inch).
