mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

All Technical Service Bulletins for Flywheel Gear: > < Ring Gear - Grinding Noise During Engine Cranking
Page 2
background image

3.

Replace drive plate and starter.

NOTE

The starter must be replaced because the pinion is possibly damaged.

PARTS INFORMATION

NOTE:

The part number of drive plate has not been changed on this modification.

WARRANTY INFORMATION
(Applies to Verified Customer Complaints On Vehicles Covered Under Normal Warranty. Refer To The SRT Microfiche For Warranty Term
Information.)

Disclaimer

All Technical Service Bulletins for Flywheel Gear: > < Ring Gear - Grinding Noise During Engine Cranking