Millenia L V6-2.5L DOHC (1997)
Shift Indicator: Adjustments
1. Shift the selector lever to park position.
2. Loosen the indicator panel screws.
3. Align the alignment screw in the slider with the holes in the indicator panel. Install suitable heavy-gauge wire to hold the slider.
4. Tighten the indicator panel screws in the order shown in the illustration to 2.0 - 2.9 Nm (18 - 26 inch lbs.).
5. Remove the wire.
6. Verify that the selector lever properly aligns with the indicator in each range.
