Millenia S V6-2.3L DOHC (Miller cycle) (2000)
Trunk / Liftgate Shock / Support: Service and Repair
STAY DAMPER DISPOSAL
WARNING: The released gas could blow powder into the air and injure the eyes. Wear safety goggles when performing this operation.
NOTE: The gas in the stay damper is colorless, odorless, and non-toxic.
1. Lay the stay damper on a flat surface.
2. Saw through the stay damper body using a hacksaw.
3. Allow the gas to escape from the stay damper.
4. Discard the stay damper.