Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-1060001.png)
Brake Master Cylinder: Service and Repair
Removal and Installation
MASTER CYLINDER REMOVAL/INSTALLATION
Caution Before removing the master cylinder, be sure to disconnect the vacuum hose (with check valve) from the power brake unit. Removing the
master cylinder with vacuum remaining in the power brake unit will cause the master cylinder piston to pop out and drain the brake fluid.
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
RETAINER REMOVAL NOTE
