Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-344001.png)
Piston: Specifications
Piston Diameter
Measure the diameter of each piston at a right angle 90° to the piston pin, 28.5 mm (1.12 inch) below the oil ring groove lower edge.
Piston-to-Cylinder Clearance
Clearance ........................................................................................................................................................... 0.010 - 0.038 mm (0.0004 - 0.0014 inch)
Maximum ..................................................................................................................................................................................... 0.112 mm (0.0044 inch)
Piston Groove Clearance
Top: 0.035 - 0.065 mm (0.0014 - 0.0025 inch)
Second: 0.030 - 0.065 mm (0.0012 - 0.0025 inch)
Oil: 0.07 - 0.16 mm (0.0028 - 0.0062 inch)
Maximum: 0.15 mm (0.0059 inch)
