Millenia S V6-2.3L DOHC (Miller cycle) (2000)
Lysholm Compressor Installation Note
Before installation, temporarily fix the rubber onto the Lysholm compressor with two-side adhesive tape.
Intake Manifold Component Installation Note
1. Install the intake manifold component with new gaskets
2. Tighten the bolts and nuts in the order shown.
Tightening torque:
1,2,3,4: 19 - 25 N.m {1.9 - 2.6 kgf.m, 14 - 18 ft.lbf}
5,6: 20 - 30 N.m {2.0 - 3.1 kgf.m, 15 - 22 ft.lbf}