Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-1567001.png)
Driver/Vehicle Information Display: Testing and Inspection
INFORMATION DISPLAY INSPECTION
1. Remove the meter hood.
2. Connect the information display connector and A/C amplifier connectors.
3. Measure the voltage at the information display terminals as indicated.
-
If not specified, inspect the parts listed under "Inspection area" and the related wiring harnesses.
-
If the parts and wiring harnesses are okay but the system still does not work properly, replace the information display.
Terminal Voltage Table (Reference) - Connector View
