Millenia S V6-2.3L DOHC (Miller cycle) (2000)
No.3 Engine Mount Removal Note
1. Suspend the engine using the SST
2. Remove the No.3 engine mount sub bracket.
3. Remove the No.3 engine mount rubber.
4. Remove the No.3 engine mount bracket.
Timing Belt Removal Note
Note: Mark the timing belt rotation on the belt for proper reinstallation.
1. Install the timing belt pulley bolt into the crankshaft.
2. Turn the crankshaft clockwise and align the all timing marks. (No.1 piston is at TDC of the compression stroke.)
Caution: When removing the bolt, hold the tensioner so that the bolt holes are aligned. Otherwise the threads can be damaged.