Millenia S V6-2.3L DOHC (Miller cycle) (2000)
Projection A (free length): 14.3 - 15.1 mm (0.563 - 0.594 inch)
Caution: Applying pressure of more than 9.8 kN (1,000 kgf, 2,200 lbs.) can damage the auto tensioner.
3. Slowly press in the tensioner rod using a press.
4. Insert a pin into the hole in the body as shown to hold the tensioner rod.
Pin diameter: 1.6 mm (0.063 inch)
Timing Belt Cover Installation Note
1. Install the timing belt cover (upper) and tighten the bolts in the order shown.
Tightening torque: 7.9 - 10.7 Nm (80 - 110 kgf-cm, 69.5 - 95.4 inch lbs.)
2. Install the timing belt covers (RH, LH) and tighten the bolts in the order shown.
Tightening torque: 7.9 - 10.7 Nm (80 - 110 kgf-cm, 69.5 - 95.4 inch lbs.)
No.3 Engine Mount Installation Note