Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-620001.png)
Oxygen Sensor: Testing and Inspection
Heated Oxygen Sensor Heater (Rear) Inspection
1. Connect the SSTs (NGS tester) to the DLC-2.
2. Select the PID/DATA MONITOR AND RECORD function of NGS tester.
3. Select "RHO2SH R" and "RHO2SH L" on the NGS tester display. NGS shows the operation.
-
If not as specified, inspect following.
-
ECT sensor
-
HO2S
Specification
Specification
