Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-705001.png)
EGR Control Solenoid: Testing and Inspection
EGR Solenoid Valve(Vent)
1. Remove the EGR solenoid valves. (See VACUUM HOSE ROUTING DIAGRAM.)
Specification
2. Verify that air flows as shown.
-
If not as specified, replace the EGR solenoid valve (vent).
Specification
3. Apply battery positive voltage to terminal A and ground terminal B of the EGR solenoid valve (vent). Verify that air flows as shown.
-
If not as specified, replace the EGR solenoid valve (vent).
