Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-785001.png)
Idle Speed/Throttle Actuator - Electronic: Testing and Inspection
Component Inspection
IDLE AIR CONTROL (IAC) VALVE INSPECTION [KJ]
1. Verify that the ignition switch is at OFF.
2. Disconnect the IAC valve connector.
3. Measure the resistance of the IAC: valve using an ohmmeter. If not as specified, replace the BAC valve.
Specification: 10.7 - 12.3 Ohms [20°C (68°F)]
