Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-850001.png)
Shift Interlock Solenoid: Testing and Inspection
Key Interlock Solenoid Inspection
KEY INTERLOCK SOLENOID INSPECTION
1. Disconnect the negative battery cable.
2. Remove the instrument cluster.
3. Disconnect the key interlock solenoid connector.
4. Inspect for continuity between terminals C and D.
-
If not as specified, replace the key interlock solenoid.
5. Connect the key interlock solenoid connector.
6. Install the instrument cluster.
7. Connect the negative battery cable.
